Air Shower for Persons and materials with 4 doors controlled by PLC
and touch screen
Air
shower.pdf
Doors: (1). 2 pieces of Single-leaf Swing doors, for persons to
enter
(2). 1 pieces of Double-leaf Swing door, for materials to enter
(3) 1 Piece of high speed shutter door, for perons and materials to
exit
Four doors are interlocked by controlled PLC, one door is open,
other three doors are closed, cannot be opened.
Description:
Air Shower Tunnel have become an integral component of the modern cleanroom because
their benefits
more than pay for the small amount of space they occupy. With their
interlocking doors and automatic
cycling, air showers act as traffic guards, controlling passage
into and out of the cleanroom.
After using it, the dust could effectively be reduced to enter the
clean area and maintain the normal working status.
This air shower tunnel of which automatic sliding door is
convenient for people entering air shower room,
as well to reduce the enter time.
Air Showers clean micro particles off personnel and equipment as
they enter or exit a cleanroom.
Upon exit, cleanrooms are envelope sealed when the unit
automatically switches into an airlock.
They can also be used to remove hazardous contaminate from
personnel when exiting facilities
Not to be ignored is the psychological impact an air shower creates: Personnel are reminded with every
passage that they are entering a controlled environment,
while prospective clients are assured of your quality control
standards when they enter your facility.
Blowing type: single-side blowing, double-side blowing, three-side
blowing.
Optional accessory:
1. Manual swing door / automatic sliding door/High speed scroll
shutter door
2. HEPA filter or ULPA filter
3. Material for cabinet: cold-rolled steel plate with powder coated
/ SUS#201 / SUS#304
4. Common fluorescent lamp / UV Sterilizer lamp
5. With voice announce
Operation Instruction
1.Put air shower on the correct location, connect the power wires
of air shower with the power wires,
There are FIVE lines: 3*Live line, 1*Null line and 1*Earth line.
The power supply is AC380V/50HZ/3 phases.
2. In order to make sure air shower to work normally and the
cleanliness of workshop, please kindly use air shower according to
the following correct method.
2.1 Please check if there are any people in air shower before you
enter it. When air shower is working entrance door and exit door
are electronic interlocked, it is forbidden to open the door at
this moment.
2.2 Put hand toward to Open switch, the entrance sliding door will
open , enter air shower, then entrance sliding door will be close
automatically, photoelectric sensor is reacted by people or goods,
blower fan will be
blowing automatically (The air shower time is set 15seconds at
factory, it is forbidden to change the air shower time during
blowing), after blowing, exit sliding door open automatically, go
out air shower,
then exit sliding door will be close automatically.
Parameter:
| Product type | Air Shower for Persons and materials with 4 doors controlled by PLC
and touch screen |
| Material for casing | T=1.2MM stainless steel |
| Material for doors | Stainless steel |
| Nozzles | Stainles steel |
| Door leaf | single leaf, double-leaf |
| Door type | swing doors and high speed shutter door |
| Blowing way | 3-side blowing |
| Control system | PLC |
| Locks | Electric interlocked |
| HEPA filter efficinecy: | 99.99% |
| Pre filter | G3 |
| Light | Philips brand |
| Photoelectric sensor | OMRON brand |
| Shower time | 0-99s adustable |
| Spurt wind speed | 25-27m/s above |
| Power supply | 380V/50HZ/3PH |
| Safeguard | Leakage switch and thermal overload relay (Protect people from
electric leakage) |
Size and specificaton:
| Product | Air Shower for Persons and materials with 4 doors controlled by PLC
and touch screen |
| Model | ASS-2000T-3-SD |
| External dimensions (mm) | W2000xD3000xH2300mm |
| Internal dimensions mm | W1500xD2900xH2000mm |
| Doors | Four doors |
| Door closer | NONE |
| Lock | electric interlocked |
| Suitable | People and Goods |
| Nozzles | 18+18+18=54PCS(3-side blowing) |
| Blower fan | 6 sets |
| Blow power(W) | 6000W |
| Weight(kg) | Appro.1200 |
| HEPA filter size | 610x610x90mm |
| HEPA filter qty | 6PCS |
| HEPA filter efficiency | H13 |
| Photolectric sensor | ORMON 2 PCS |
| Fluorescent Lamp | Philips 3x 18W |
| Nozzle diameter | 32mm |
| Air shower time | 0-99 s Adjustable |
| Spurt wind speed | 22-25m/s |
| Power Supply | AC380V/50Hz/3Ph |
| Control system | PLC, electric interlock, automatical blowing by photoelectric
sensor
|
Air shower tunnel picture:
Drawing of Air Shower Tunnel
Can custom air showers be manufactured?
We offers both standard and custom air showers. Please contact us
for more information.
Is it possible to alter the settings on the air shower?
Our air showers allow the operator flexibility to program numerous
settings using an easy-to-use touch-screen control panel. You can
easily set cycle operation times, entrance/exit delays, when the
lights turn off/on, and more.
Testing in factory:
All of equipment will be individually tested for safety and
performance in accordance with international Standards before
shipment.
Each unit is shipped with a documentation outlining the tests
undertaken and the units individual results for each unit.
Testing before shipment:
1. Appearance inspection
2. Electrical safety tests
3. Air wind speed testing
4. Function testing
Warranty:
The warranty of our equipment is for 1 year, but excluding
consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual with
testing report.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or
document request.
Replacement parts:
1. HEPA filter: It should be changed in half or one year once.
2. Pre filter: It should be changed in 3-6 month once.
Why you choose ZHISHENG Company ?
Professional service:
Fast reply in 12 hours if we receive any inquiry or request from
customer
Familiar with equipment.
Technician or enginner can go to Southeast Asian countries for
guiding insallation of machines. Like Thailand, Vietnam,
Philipines, Malaysia and so on.
Delivery time:
• Production period:15-30days
• Shipping notice or insurance for you after the goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide 1 year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.
Payment Term:
30% prepayment by T/T at order, the balance of payment before
shipment.
Cleanroom equipments,like air shower, FFU. It is one-year warranty.
Certificate:
We have CE and ROHS Certificate for air shower
